ARAMA SONUÇLARI

Armoured Wrapping Tube CableTM (WTC) consists of Fujikura's novel Spider Web RibbonsTM (SWR) which are wrapped by a water blocking tape and non-metallic side strength members embedded in the corrugated steel tape armoured sheath. Compared to normal loose tube cable, this full dry structure ribbon cable drastically reduces the cable deployment time by eliminating the process to wipe out jelly and by mass fusion splicing just like conventional ribbon cable. WTC achieves the world's highest density optical fiber ribbon cable and allows effective utilization of existing conduits. Suitable for lashed aerial, duct and direct buried installation applications.

Wrapping Tube CableTM (WTC) consists of Fujikura's novel Spider Web RibbonsTM (SWR) which are wrapped by a water blocking tape and non-metallic side strength members embedded in the sheath. Compared to normal loose tube cable, this full dry structure ribbon cable drastically reduces the cable deployment time by eliminating the process to wipe out jelly and by mass fusion splicing just like conventional ribbon cable. WTC achieves the world's highest density of optical fiber ribbon cable and allows effective utilization of existing conduits. Suitable for lashed aerial and duct installation applications.

Indoor LSZH Wrapping Tube CableTM (WTC) consists of Fujikura's novel Spider Web RibbonsTM (SWR) which are wrapped by a water blocking tape and non-metallic side strength members embedded in the flame retardant Low Smoke Zero Halogen (LSZH) sheath. Compared to normal loose tube cable, this full dry structure ribbon cable drastically reduces the cable deployment time by eliminating the process to wipe out jelly and by mass fusion splicing just like conventional ribbon cable. WTC achieves the world's highest density of optical fiber ribbon cable and allows effective utilization of indoor . Suitable for indoor applications.

Multi Mode Fiber with 50µm of Core Diameter (ITU-T G.651) Short-Reach Optical Transmission for LAN in Offices and Premises

Multi Mode Fiber with 62.5µm of Core Diameter Short-Reach Optical Transmission for LAN in Offices and Premises

Multi Mode Fiber with 50µm of Core Diameter (OM-3) For 10 Gigabit Ethernet Optical Transmission for LAN in Offices and PremisesFuture: Full complying with 10Gbase-SR,SW for IEEE 802.3ae. Link length for 10Gigabit Ethernet is 300m.

Pump LD wavelength stabilizer is used for external cavity of pump Laser Diode. 980nm and 1420-1490nm wavelength ranges are available.

Fujikura Polarization Beam Combiners are produced by Fujikura fused taper technology. Fujikura PBC are qualified with Telcordia GR-1221-CORE and GR-1209-CORE.

Fujikura PM Couplers are produced by Fujikura fused taper technology and knowhow of PANDA fiber. Fujikura PM couplers are qualified with Telcordia GR-1221-CORE and GR-1209-CORE.

Fujikura PANDA fibers have a superior optical property in polarization-maintaining because of the symmetrical accuracy in cross section and the uniform constitution of stress applying parts. Based on Fujikura's fiber technology, PANDA fibers have a universal quality with not only low polarization-crosstalk and low attenuation but also the broad suitability for fusion-splice or optical connector.

Fujikura PANDA fibers have a superior optical property in polarization-maintaining because of the symmetrical accuracy in cross section and the uniform constitution of stress applying parts. Based on Fujikura's fiber technology, PANDA fibers have a universal quality with not only low polarization-crosstalk and low attenuation but also the broad suitability for fusion-splice or optical connector.

FSCO-CB/CB3 Joint Closures have in-line configuration which is suitable for space constrained hand holes or man holes.

Fujikura's FuseConnectorTM family connectors are factory pre-polished, and easily terminate by fusion splicer in the field.

FSCO-AS Aerial Weathertight Splice Closures are designed for aerial strand-mount FTTH drop locations where drop cables are spliced to distribution cables.

ADC-13/18/19 supplies DC poer exclusively for Fujikura Fusion Splicers.ADC series can be used as an AC adapter, battery charger or an external DC poer inlet port.

The FSM-100M offer a host of innovative technologies to address the rapidly expanding splicing needs of factory, manufacturing, laboratory and R&D applications. These capabilities of these model's will revolutionize the way users will splice various types of specialty fibers: LDF, low contrast PM, PCF structured, etc.