Telecommunication Fibers

ADC-13/18/19 supplies DC poer exclusively for Fujikura Fusion Splicers.ADC series can be used as an AC adapter, battery charger or an external DC poer inlet port.

Battery Pack for Fujikura fusion splicer.

The FST-12 is a tool to quickly split a 12-fiber ribbon into individual fibers or sub-groups with separation ratio from 1:11 to 6:6.

The FAT-04 is designed to arrange 250μm coated fibers and to make a temporary ribbon configutation so that the fibers may be mass fusion spliced using the same procedures as conventional ribbon fiber.

The TJ series are designed for temporary jointing of optical fiber andor ribbon by using fiber holder.

Fujikura’s FuseConnect™ with factory pre-polished ferrule, utilizes fusion splicer to terminate the connector in the field. This eliminates polishing, adhesives and crimping in the field, which minimizes the potential for operator error and expensive connector scrap. Fusion splice addresses return loss concerns present in analog optical networks. This advanced process yields true APC performance for SC/APC and LC/APC configuration. The innovative design and simplified field installation makes the FuseConnect™ the ideal choice for various fiber termination and FTTX applications.

The visual fault identifier FVI-01 is a miniature red-laser light source. The red light generated from FVI-01 will be identified at the break point, sharp-bend or high loss connection in coating fiber or fiber cord.

The FLS-20T is rugged and compact designed laser light source, which is used for optical fiber testing. The wavelength is selectable 1310nm and 1550nm for single mode fiber.

FID-30R and FID-31R are optical fiber identifier for telecommunication cable. FID-30R is built-in optical power meter.

DC power cord for Fujikura Fusion Splicer.

The 90R16 is a mass fusion splicer capable of splicing up to 16 fiber ribbon cables simultaneously. In previous mass fusion splicer models, the v-grooves could become dirty over time due to debris and glass deposits from splicing accumulating in the v-grooves. Which in turn, could lead to fibre offsets and high losses if they were not regularly cleaned which added to the overall process time. The 90R16 comes with a first of its kind, innovative user replaceable V-groove assembly which makes this issue a thing of the past and is supplied as standard equipment with the 90R16 kit. This new V-groove assembly can be quickly and easily fitted in the field, minimizing downtime and maximising productivity. In addition, the new V-groove design enables splicing of both conventional type 12-fiber encapsulated ribbon and SWR (Spider Web Ribbon) whilst also accommodating 250um and 200um pitch fibers. The 90R16 can also splice single fibers if required. also making use of Active Blade Management Technology, which now can connect to two CT50 cleavers simultaneously. Features

SS03 have three holes. The smallest hole is for stripping 250 um cable down to glass fiber. The second hole is for stripping 900 um buffer coating down to 250 um buffer coating. The biggest hole is for stripping 2-3mm fiber jacket down to 900 um buffer coating.