Telekomünikasyon Uygulamaları

DC power cord for Fujikura Fusion Splicer.

SS01 have one hole for stripping 250 um cable down to glass fiber.

The RS02 is designed and developed with emphasis on operability and usability where less force is required for the stripping process. Furthermore wireless link with smartphones for operational parameters adjustment. These fiber stripping tools are also compatible with stripping Fujikura latest Spider Web RibbonTM ,which consists of optical fibers (with a coating diameter of 250μm or 200 μm) fixed intermittently.

The RS03 is designed and developed with emphasis on operability and usability where less force is required for the stripping process. Furthermore,equipped with new features such as large capacity battery for 600 stripping cycles, 6 times larger than conventional stripper, and wireless link with smartphones for operational parameters adjustment. These fiber stripping tools are also compatible with stripping Fujikura latest Spider Web RibbonTM ,which consists of optical fibers (with a coating diameter of 250μm or 200 μm) fixed intermittently.

LTC-01 is the special tool for removing loose tube without damage to the UV acrylate coated optical fiber inside the loose tube.

Fujikura’s FuseConnect™ with factory pre-polished ferrule, utilizes fusion splicer to terminate the connector in the field. This eliminates polishing, adhesives and crimping in the field, which minimizes the potential for operator error and expensive connector scrap. Fusion splice addresses return loss concerns present in analog optical networks. This advanced process yields true APC performance for SC/APC and LC/APC configuration. The innovative design and simplified field installation makes the FuseConnect™ the ideal choice for various fiber termination and FTTX applications.

The visual fault identifier FVI-01 is a miniature red-laser light source. The red light generated from FVI-01 will be identified at the break point, sharp-bend or high loss connection in coating fiber or fiber cord.

The FLS-20T is rugged and compact designed laser light source, which is used for optical fiber testing. The wavelength is selectable 1310nm and 1550nm for single mode fiber.

FID-30R and FID-31R are optical fiber identifier for telecommunication cable. FID-30R is built-in optical power meter.

SS03 have three holes. The smallest hole is for stripping 250 um cable down to glass fiber. The second hole is for stripping 900 um buffer coating down to 250 um buffer coating. The biggest hole is for stripping 2-3mm fiber jacket down to 900 um buffer coating.

ADC-13/18/19 supplies DC poer exclusively for Fujikura Fusion Splicers.ADC series can be used as an AC adapter, battery charger or an external DC poer inlet port.