Telecommunication
Test Port Cables & Adaptors
Product code : H6ZİCU
Rosenberger offers a wide test port portfolio of cable assemblies, ruggedized adaptors and an interchangeable port system for vector network analyzers (VNA) up to 90 GHz: Test port cables providing outstanding phase and amplitude stability are also available as sets containing two cables with a standard length of 60 cm each. The range is optimized for frequencies up to 12 GHz, 18 GHz, 26.5 GHz, 40 GHz, 50 GHz, 70 GHz and 90 GHz. VNA test port cables are also available as cable sets, containing two cables of 600 mm standard length, and are supplied in high-quality wooden boxes. Test port adaptors are designed to connect directly to the VNA test port via a ruggedized coupling nut. They are available in the RPC-3.50, RPC-2.92, RPC-2.40, RPC-1.85 and RPC-1.35 connector series. Available as "in series" and "inter series" versions, their ruggedized construction ensures reliable protection of VNA test ports and reduces mechanical abrasion to a minimum. Interchangeable port connectors are designed for test equipment applications using test ports that will be continually mated and re-mated. This has been achieved by the development of an interchangeable port connector system featuring a panel mounting half and an innovative neutral interface, allowing a high number of mating cycles without causing possible damage to the equipment device interface.
- Impedance 50 Ω
- Frequency DC to 90 GHz
- Mating cycles > 500
Specification Sheet
FEATURES: Cleaver tracking and upkeep with wireless communication Improved real-time arc control for fibers with poor cleave angles Loose and tight buffer with same sheath clamp Automated wind protector, sheath clamps and splice operation Graphical User Interface with 5.0" Touchscreen PC software and 90S manual downloaded from splicer Multi-function transit case with integrated workstation Lithium-ion battery with 300 splices/shrinks per charge APPLICATIONS: Distribution fiber repair Long-haul network installation Field termination with splice-on connectors Access network installation Fanout kits, pigtails and splice cassettes OSP cable installation and repair Optical modules – splitters, couplers, MUXs, EDFAs and attenuators
Item Successfully Added to Cart
FEATURES: Warm Splice Imaging (WSI) loss estimation technology Improved real-time arc control for fibers with poor cleave angles Bluetooth enabled cleaver management Two camera, active cladding alignment 5" touchscreen monitor Interchangeable sheath clamps and fiber holders Fully ruggedized for shock, moisture and dust resistance Extended-life electrodes, 5,000 splices, exchangeable without tools
Item Successfully Added to Cart
Recent trends in optical fiber networks demand optical fibers having reduced attenuation to help long distance transmission and bend insensitiveness for harsh installation conditions. FutureGuide®-Ace is an enhanced fiber categorized as ITU-T G.652.D from Fujikura. It offers zero(low)-water peak attribute that enables all-band transmission and superior reduced-attenuation characteristics, while converging bend insensitiveness complying with ITU-T G.657.A1. Also the fiber ensures backward compatibility with all existing conventional networks based on G.652 fibers. FutureGuide®-Ace helps cable manufacturers to design cost-effective and aggressive higher fiber-count cable designs that assist telecom operators to plan for higher fiber density installations. Furthermore, reduced attenuation characteristics ensure longer transmission distance with less number of amplifiers and thus contributes to the reduction of total cost. FutureGuide®-Ace is suitable from long-haul to access networks of 40Gbps, 100Gbps and beyond.
Item Successfully Added to Cart
Clad Alignment Fusion Splicer 45S Kit The 45S is the essential splicer based on active clad alignment technology with features, Fast Operation, User-friendly Design, Versatile Functionality and Consistent Quality.