Özel Uygulamalar
Specialty Fiber Fusion Splicers FSM-100P+
Ürün Kodu : UDTHJF
Whether splicing similar fiber types or double clad LDF fibers for high power lasers, the FSM-100P+ splicers provide multiple solutions for diverse production needs. The FSM-100 + series sets the standard for fusion splicing with a multitude of new features designed to make splicing easier.
- Advanced plasma zone control methods
- LDF (Large Diameter Fiber) splicing capability
- Enhanced arc calibration methods
- Dual splice loss estimation
- Enhanced Sweep arc
- Fiber profile learning function
- Enhanced ability for fiber shaping, glass processing, tapering
- EndView observation system
- Advanced PM fiber alignment methods
Specification Sheet
The FP-03 series is the industry standard for durable and lasting protection of single fiber splices in field installations. The FPS01 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules.
Ürün Başarıyla Sepete Eklendi
The FAT-04 is designed to arrange 250μm coated fibers and to make a temporary ribbon configutation so that the fibers may be mass fusion spliced using the same procedures as conventional ribbon fiber.
Ürün Başarıyla Sepete Eklendi
AFL’s LZM-100 LAZERMaster is a glass processing and splicing system that uses a CO2 laser heat source rather than electrodes, ensuring repeatable performance and low maintenance, and eliminating electrode or filament maintenance and instability. Splicing or adiabatic tapering (to create mode field adapters or pump combiners) can be performed with glass diameters of 2.3 mm or less. The high resolution optical analysis system works in conjunction with on-board firmware for fully automatic splicing, tapering and other glass shaping processes.
Ürün Başarıyla Sepete Eklendi
The 90R12 is a mass fusion splicer capable of splicing up to 12 fiber ribbon cables simultaneously. In previous mass fusion splicer models, the v-grooves could become dirty over time due to debris and glass deposits from splicing accumulating in the v-grooves. Which in turn, could lead to fibre offsets and high losses if they were not regularly cleaned which added to the overall process time. The 90R12 comes with a first of its kind, innovative user replaceable V-groove assembly which makes this issue a thing of the past and is supplied as standard equipment with the 90R12 kit. This new V-groove assembly can be quickly and easily fitted in the field, minimizing downtime and maximising productivity. In addition, the new V-groove design enables splicing of both conventional type 12-fiber encapsulated ribbon and SWR (Spider Web Ribbon) whilst also accommodating 250um and 200um pitch fibers. The 90R12 can also splice single fibers if required. also making use of Active Blade Management Technology, which now can connect to two CT50 cleavers simultaneously.